REFERENCES & PARTNERS


Below you will find some of our distribution partners and well-known customers

Reliability, trust and satisfaction are the cornerstones of long-term cooperations.

Our goal is a future-oriented partnership and close contact with our customers.


Contractual partner

Are you interested in our products? Please feel free to contact us directly, we will set up contact with one of our sales partners. There is no sales partner in your country yet? No problem, we process your inquiry directly in house.

Below you will find some reference customers:

The aim of FYSAM Auto Decorative GmbH was to discharge an aluminium quantity of 1 kg/h from an anodizing bath in order to maintain a desired aluminium concentration permanently in the bath. In order to solve this problem, a module of 10 spiral membrane modules was integrated into the plant. The volume flow of the spiral membrane modules amounts 10 l/h.
We were commissioned by Grau & Wagenblast oHG with the following key data: Two anodising baths with a filling quantity of 2000 litres each and a desired aluminium discharge quantity of 90 g/h. We realized the project with a compact system of one module, which was integrated into the periphery. This module allows the user to set a variable volume flow ranging from 3 l/h to 15 l/h for the flow through the spiral membrane module. This makes it possible to react flexibly to the amount of aluminium.
Due to limited space conditions, we decided to build a compact, special plant with 8 spiral membrane modules. Spiral membrane modules and pretreatment were accommodated on a common frame. Two of the four intermediate tanks were eliminated, so that deionized water is drawn directly from the storage tank and the wastewater runs back into the wastewater system in a free fall without pumping. With our system, the customer saves, among others, a very expensive additive.
The goal of Witte-Metallveredelung GmbH was to process one bath of anodizing. We realized the project with a compact 1 unit system. This system allows the user to set a variable volume flow of 7 l/h to 15 l/h for the flow through the spiral membrane module. This gives the possibility to react flexibly to the amount of aluminum introduced.
A DS10-30 box with a total of 10 spiral membrane modules was installed at Gretsch-Unitas. This plant is suitable for applications > 90 l/h acidic wastewater flow. Our plant was connected to an anodizing bath and operated continuously in three-shift operation.

Contact

Spiraltec GmbH

Heinzenberger Weg 34
74343 Sachsenheim
Germany

Phone: +49 7147 9670 201
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.